WIRED COMMUNICATIONS: Application Resources
A switch fabric is an interconnect architecture for redirecting data within a system from one of the ports in a line card to another port in a different line card. The two primary switch fabric...
>>
As the deployment of Fiber to the Home (FTTH) technologies in the access network accelerates, vendors and technology innovators are looking ahead to solve next-generation applications'...
>>
LMDS, MMDS. Fixed Wireless Broadband. ... 2G & 2.5G Cellular Networks.
>>
For some time now Ethernet has been the protocol of choice in the enterprise, home, and mobile infrastructure for transporting Internet Protocol (IP) data, voice, and video over Local Area Networks...
>>
Network processing units (NPUs) provide great value to metro network equipment architectures by providing flexible and adaptable processing solutions. Memory-intensive packet searches -routing,...
>>
A look at the current state of the worldwide communications network and at where it is heading
>>
Passive Optical Networks (PON) is the leading technology being used in FTTx deployments. PON is different than other optical network topologies in that it is a Point to Multi-Point (P2MP)...
>>
Burr-Brown's dual Analog Front End chip greatly reduces the size and cost of a DSL (Digital Subscriber Line) system by providing all of the active analog circuitry needed to connect two digital...
>>
Overview of network processor technology and explains why RISC-based architectures are insufficient for building next-generation switches and routers.
>>
The LLP-W offers a highly integrated solution for multiservice applications such as wireline access network and 2.5G/3G wireless access applications. The full bidirectional data bandwidth of the...
>>
This application note describes how to implement the interface between an ADSP-2126x SHARC processor and a
MultiMediaCard (MMC). The application note also describes the MMC command format and...
>>
This application note provides details on how to combine Zarlink’s Digital PLL products with Zarlink’s ZL30406 SONET/SDH Clock Multiplier Analog PLL to provide a robust, ultra-low...
>>
Passive Optical Network Application Notes :: PON IC Solutions
Passive Optical Network (PON) ONU and OLT (1310nm, 1490nm) Modules: • Transimpedance Amplifier (TIA). • Post Amplifier. • Integrated Laser Driver & Post Amplifier.
>>
This EE-Note describes how to simultaneously run two network interfaces with ADSP-BF537 and ADSP-BF536 Blackfin® processors. This description and all testing are based on a hardware setup...
>>
Market dynamics, architectures, solutions
>>
To help standardize building practices for future platforms, the telecom market is moving toward adopting the Advanced Telecom Computing Architecture (ATCA). The availability of silicon solutions...
>>
Despite the recent turmoil in the local multipoint distribution service (LMDS) market in North America, there are still promising forecasts for the deployment of fixed high-speed broadband wireless...
>>
This application note explains how to configure and run Ethernet-based applications on the MSC8144 DSP to maximize performance and minimize overhead. The example code in the .zip file that...
>>
Broadband access networks are evolving from copper-based infrastructure to a mix of fiber and copper networks. Different technologies such as ADSL, VDSL, cable, Ethernet passive optical network...
>>
This application report outlines the implementation of a CPE remote management scheme using the clear EOC Channel. The capabilities of the Clear EOC Channel are discussed for G.dmt different...
>>
Traditional parallel bus architectures are history. Rising clock rates and the complexities associated with minimizing skew and delay while managing signal noise and crosstalk have conspired to cap...
>>
Gigabit Ethernet with 1000Mbit/s over standard copper cables is now available. For most applications, the 10Mbit/s or the 100Mbit/s version is sufficient to transport user data between a server and...
>>
The Altera POS-PHY Level 4 MegaCore function is highly
parameterized, and provides a rich set of features to meet the optimization requirements of a number of applications. The POS-PHY Level 4...
>>
SONET networks transport both voice and data over long distances. Standard protocols include ATM for voice and data and HDLC or PPP for data transfer. However, each of these protocols introduces...
>>
On the service-provider side of an LMDS system, co-located with the antenna, is a digital basestation that carries out the lower layer functions required to communicate over the air.
>>
This white paper provides some background on fiber-based broadband access technologies and a tutorial overview of the two most popular very high-speed PON access network standards: the ITU-T...
>>
This EE-Note provides an overview of the Ethernet specification and some popular protocols that can be used “on top of” an Ethernet driver. The goal is to provide the reader with the...
>>
This application note describes the ADN2891 evaluation Switches Functions Default Setting Options board. The ADN2891 limiting amplifier works as a data S1 PD_Cath AVDD NC quantizer for SONET,...
>>
The Age of Security: Over the last few decades, developers of communications systems have been faced with a market demanding higher bandwidths, higher reliability, lower cost, improved...
>>
The ZL50110/11/14 and ZL50118/19/20 families are a range of highly functional Circuit Emulation Services over Packet (CESoP) processors. They provide both structured and unstructured circuit...
>>
The LXT361 is a fully integrated, combination transceiver for T1/E1 ISDN Primary Rate Interface (ISDN PRI) and general T1/E1 Long and Short Hual applications. The device operates over 0.63 mm (22...
>>
Fiber To The Home (FTTH) deployments continue to enjoy accelerated growth worldwide, with major deployments underway in Japan (Nippon Telegraph and Telephone Corporation [NTT]), Korea (Korea...
>>
• XAPP240 - High-Speed Buffered Crossbar Switch &
